AEMION+™ - AF2-CLF8-15
- 15 micron
- Broad chemical stability
Aemion+ AF2-CLF8-15 is a high performance, , state of the art membrane that offers broad chemical stability (strong alkaline up to 5M KOH) and durability for electrolysis. This 15 micron membrane is typically used for AEM fuel cells, Alkaline electrolyzers, metal-air batteries, CO2 electrolysis, acid recovery and metal separation.
Aemion+ AF2-CLF8-15 is very easy to handle and processable in common solvents for optimised electrochemical properties and catalyst layers. This brand new membrane offers low water uptake with high current density and voltages generated to maximise power density and efficiency. LF refers to the reinforcement class and type of membrane which in this case is a Fluorinated non woven.
| Total Thickness |
Total thickness is taking into account all the films, coatings, adhesives, release liners and special layers and is the maximum thickness of a film or tape.
| Ion Exchange Capacity (IEC) |
Ion Exchange Capacity (IEC)
Ion-exchange capacity measures the ability of a material to undergo displacement of ions, previously attached into its structure, by oppositely charged ions. It is measured as the quantity of ions that can pass through a specific volume and a common unit is eq/L.
In the case of an Ion-exchange polymer, it represents the total of active sites or functional groups responsible for the exchange and is the theoretical maximum amount of ions that we can load.
|2.3 - 2.6 meq/g|
|Water Absorption||20 %|
| Elongation |
Elongation is the process of lengthening something.
It is a percentage that measures the initial, unstressed, length compared to the length of the material right before it breaks.
It is commonly referred to as Ultimate Elongation or Tensile Elongation at break.
|50 - 60 %|
| Glass Transition Temperature (Tg) |
Glass Transition Temperature (Tg)
The glass transition temperature for organic adhesives is a temperature region where the polymers change from glassy and brittle to soft and rubbery. Increasing the temperature further continues the softening process as the viscosity drops too. Temperatures between the glass transition temperature and below the decomposition point of the adhesive are the best region for bonding.
The glass-transition temperature Tg of a material characterizes the range of temperatures over which this glass transition occurs.
|Storage Temperature||Ambient °C|
Non Disclosure Agreement
This is a proprietary product from Ionomr, therefore, we require a signed NDA between the end customer and Ionomr before we are able to ship out the material, either for commercial use, or research.
This is done to prevent reverse engineering and public disclosure. The NDA does not restrict patenting anything, but does include the physical materials and their composition as confidential which prevents specific disclosure in a patent or otherwise but not calling out use of an AEM including Aemion by trade name. The test results are included as confidential information, and require approval from both parties to disclose. We are not concerned about blocking any publications, but would typically advise if we believe better results can be achieved.
We have a more explicit MTA (Materials Transfer Agreement) we use with academic/research organizations which outlines more detail around materials IP and publication.
Please find the NDA here and fill it in when contacting us for quotations.