Silicone for junction coating resins

Typical Applications of liquid silicone junction coating resins

Liq­uid sil­i­cone junc­tion coat­ing resins are designed for cov­er­ing diode, tran­sis­tor, and rec­ti­fi­er junc­tions. These resins pro­vide a 100% solids coat­ing and our rigid qual­i­ty con­trol guar­an­tees ion­ic puri­ty lev­els of max­i­mum 1 ppm.

CAPLINQ presents Lin­qSil LSC junc­tion coat­ing resins, which include Lin­qSil LSC 100, a one part junc­tion coat­ing, and Lin­qSil LSC 200, a two-part junc­tion coat­ing. These coat­ings will pre­vent elec­tri­cal break­down, sta­bi­lize peak inverse volt­age, min­i­mize junc­tion sur­face leak­age, and pro­vide envi­ron­men­tal pro­tec­tion for high tem­per­a­ture performance.

Typ­i­cal appli­ca­tions of these junc­tion coat­ing resins include elec­tri­cal and mechan­i­cal insu­la­tion pri­or to plas­tic mold­ing, pro­tec­tive coat­ings over hybrid inte­grat­ed cir­cuits, and her­met­ic-type pas­si­va­tion of semiconductors.

Other applications of liquid silicone resins in various devices are stated below:

  • 1. GTO Thyris­tor Coating
    A GTO is a four lay­er switch­ing device that is used in elec­tron­ic cir­cuits to turn it on or off by apply­ing a short gate pulse to it. liq­uid sil­i­cones for junc­tion coat­ing resins is done in the GTO thyris­tor cir­cuit to make it mois­ture resis­tant and a sta­ble heat device.
  • 2. Hybrid IC Chip Coating
    A hybrid inte­grat­ed cir­cuit is an elec­tron­ic cir­cuit that is con­struct­ed of var­i­ous semi­con­duc­tor devices- tran­sis­tors, diodes, induc­tor, resis­tors, and capac­i­tors bond­ed to a sub­strate board. The hybrid IC chip coat­ing is done to pre­vent the chip dam­age dur­ing potting.
  • 3. LCD Elec­trode Pro­tec­tion Coating
    LCD elec­trodes are used in pan­el dis­plays that use the light mod­u­lat­ing prop­er­ties of the liq­uid crys­tal to dis­play images in mono­chrome or col­or. Liq­uid sil­i­cone junc­tion coat­ing resins is used for cir­cuit pro­tec­tion, and to pro­vide elec­tri­cal and mechan­i­cal insu­la­tion before plas­tic molding.
  • 4. Pho­to Diode Coating
    The pho­to­di­ode is a semi­con­duc­tor device that con­verts light into elec­tri­cal cur­rent based on the pho­tons absorbed by it.
    The liq­uid sil­i­cone coat­ing is used to sta­bi­lize peak inverse volt­age, as apply­ing a reverse volt­age to a pho­to­di­ode caus­es severe dam­age to the device performance.
  • 5. Ther­mal Head Coating
    Ther­mal coat­ings are applied to the metal­lic sur­faces, which are oper­at­ed at ele­vat­ed tem­per­a­tures in the form of exhaust heat man­age­ment. The liq­uid sil­i­cone junc­tion coat­ing resins are applied to pro­vide envi­ron­men­tal pro­tec­tion for high-tem­per­a­ture per­for­mance and ther­mal cycling.

To learn more regard­ing the Lin­qSil LSC 100 and Lin­qSil LSC 200 liq­uid sil­i­cone junc­tion coat­ing resins, vis­it www.caplinq.com. You can also con­tact us if you have ques­tions regard­ing the appli­ca­tions Lin­qSil LSC series for junc­tion coat­ing resin or about CAPLINQ’S liq­uid encap­su­lants.

About Chris Perabo

Chris is an energetic and enthusiastic engineer and entrepreneur. He is always interested in taking highly technical subjects and distilling these to their essence so that even the layman can understand. He loves to get into the technical details of an issue and then understand how it can be useful for specific customers and applications. Chris is currently the Director of Business Development at CAPLINQ.

Leave a Reply

Your email address will not be published. Required fields are marked *