CAPLINQ Signs Deal with MJ Gordon

CAPLINQ Ned­er­land announced today that it has become the M.J. Gor­don Co.‘s “Exclu­sive Euro­pean Dis­trib­u­tor” and fur­ther to pro­mote its prod­ucts to its cus­tomers in the Mid­dle East and Africa. Under the terms of the agree­ment, CAPLINQ will rep­re­sent M.J. Gor­don’s line of Per­masil Car­nau­ba Wax Mold Release Aerosols.

A single-minded focus

M.J. Gor­don’s Car­nau­ba Wax Mold Release is dubbed as the “World’s Finest Car­nau­ba Wax Mold Release”. Though it does triple-agent duty as a new mold break-in agent, mold-release agent and rust-proof­ing agent, it comes in only three car­nau­ba wax aerosol for­mu­las ranked by popularity:

  1. Non-Flam­ma­ble Sol­vent-Based (Green Label) 539gr.
  2. Non-Flam­ma­ble Water-Based (Blue Label) 425 gr.
  3. Flam­ma­ble Sol­vent-Based (Red Label) 369 gr.

Used world­wide by the lead­ing man­u­fac­tur­ers of semi­con­duc­tors, capac­i­tors, resis­tors, trans­form­ers, induc­tors, relays, elec­tro-med­ical equip­ment and more, M.J. Gor­don Mold Release Aerosol For­mu­las ensure that regard­less of the prod­uct man­u­fac­tured or the type of mold­ing process per­formed, these qual­i­ty prod­ucts improve these oper­a­tions. Not only do they offer the uni­for­mi­ty, con­trol, and con­ve­nience of an aerosol spray, they actu­al­ly enhance the Ten­sile Strength and Dis­place­ment Prop­er­ties of high­ly engi­neered plas­tic resins as test­ed by an ISO9002 Cer­ti­fied Laboratory.

We are tru­ly excit­ed about with this joint busi­ness ven­ture with Chris Per­abo and the CAPLINQ Ned­er­land team,” remarked Allan Gor­don, Pres­i­dent of M.J. Gor­don Co. “We tru­ly believe that with the rep­u­ta­tion and exper­tise of Mr. Per­abo, who is well known in the semi­con­duc­tor indus­try, we will be well posi­tioned to cap­i­tal­ize on all the busi­ness oppor­tu­ni­ties in the Euro­pean semi­con­duc­tor market.”

A slippery fit

The range of Car­nau­ba Wax Mold Releas­es offered by M.J. Gor­don Co. com­ple­ments the cur­rent prod­uct offer­ings as well as the strate­gic direc­tion of CAPLINQ Ned­er­land, whose aim is to sup­ply a com­plete line of prod­ucts to semi­con­duc­tor man­u­fac­tur­ers, there­by enabling them to reduce their time-to-market.

We have always advo­cat­ed the use of Car­nau­ba Wax to our cus­tomers for break­ing-in new molds and after mul­ti­ple shots of epoxy mold com­pound,” stat­ed Chris Per­abo, founder of CAPLINQ Ned­er­land. “To have this prod­uct in an Aerosol is every pro­duc­tion engi­neer’s dream and M.J. Gor­don’s aerosol prod­ucts are the most respect­ed in the industry.”

About M.J. Gordon Co.

Found­ed in 1954 in Pitts­burgh, PA, the M.J. Gor­don Co. was an ear­ly pio­neer in the field of Sil­i­cones and Car­nau­ba Wax in met­al pol­ish­ing. In 1959, the M.J. Gor­don Co. pio­neered the for­mu­la­tion of Nat­ur­al Car­nau­ba Wax in an easy-to-use, hand-held, 20oz. size Aerosol Con­tain­er. With near­ly 50 years of Aerosol Car­nau­ba Wax for­mu­lat­ing and pack­ag­ing expe­ri­ence, the M.J. Gor­don Co. “Uncon­di­tion­al­ly Guar­an­tees” that every sin­gle can will oper­ate from the first spray until com­plete­ly emp­tied with­out fail or the entire case of 12 cans will be replaced at no prod­uct nor freight cost to the cus­tomer. Mr. Gor­don reports that dur­ing the past 16 years, with mil­lions of cans sold to dozens of indus­try-lead­ing cus­tomers all over the world, not a sin­gle can has failed to oper­ate completely.

Click here to learn more about MJ Gor­don #909C Per­masil and oth­er mold release agents.

About Chris Perabo

Chris is an energetic and enthusiastic engineer and entrepreneur. He is always interested in taking highly technical subjects and distilling these to their essence so that even the layman can understand. He loves to get into the technical details of an issue and then understand how it can be useful for specific customers and applications. Chris is currently the Director of Business Development at CAPLINQ.

Leave a Reply

Your email address will not be published. Required fields are marked *