Double-sided polyimide tape with ultra-thin silicone adhesive layer

Recent­ly, we were asked if CAPLINQ sup­plied a tape with the fol­low­ing spec­i­fi­ca­tions:

  • Adhe­sive: 17um Sil­i­cone adhe­sive
  • Poly­imide Back­ing Car­ri­er: 25um Poly­imide
  • Adhe­sive: 17um Sil­i­cone adhe­sive
  • Release lin­er: Paper or PET >=50um
  • Roll Width: 50mm wide

A big part of what CAPLINQ does is cus­tom-designed spe­cial­ty tapes. This means design­ing and man­u­fac­tur­ing tapes to cus­tomer spec­i­fi­ca­tions. Once we defined the require­ments, we were able to see how this prod­uct fit into our prod­uct line. We first drew up a sketch (like the one in the image), and pre­sent­ed it to the cus­tomer who agreed. Then we pre­sent­ed it to pro­duc­tion, who also under­stood the require­ment. In our nomen­cla­ture, this would appear as LINQTAPE PIT1SD-UT.

PIT1SD-UT: Double-sided polyimide tape with a very-thin silicone adhesive layer

We use our prod­uct nomen­cla­ture to accu­rate­ly describe our mate­ri­als:

  • LINQTAPE: This is our brand name used for our spe­cial­ty tapes
  • PIT: Stands for Poly­imide Tape
  • 1: Stands for 1mil thick poly­imide (gener­ic kap­ton) back­ing or car­ri­er
  • S: Stands for Sil­i­cone adhe­sive
  • D: Dou­ble-sided. It also means that there is only ONE release lin­er, the oth­er side is wound to the top of the bot­tom lay­er
  • UT: Stands for our “Ultra-Thin” adhe­sive lay­er of 0.5mil or 17um

As of this writ­ing, the prod­uct has yet to be pro­duced. But it will be, and it will be added to the ever-grow­ing list of prod­ucts we offer our cus­tomers.

For more infor­ma­tion, you can vis­it the prod­uct page of PIT2SD, con­sult our com­plete list of poly­imide tapes, or you can com­pare our poly­imide films and tapes. Should you have any oth­er ques­tions, please con­tact us or vis­it the CAPLINQ web­site today to find out more, or for more infor­ma­tion.

About Chris Perabo

Chris is an energetic and enthusiastic engineer and entrepreneur. He is always interested in taking highly technical subjects and distilling these to their essence so that even the layman can understand. He loves to get into the technical details of an issue and then understand how it can be useful for specific customers and applications. Chris is currently the Director of Business Development at CAPLINQ.

One thought on “Double-sided polyimide tape with ultra-thin silicone adhesive layer

Leave a Reply

Your email address will not be published. Required fields are marked *