PIT0.5S: 0.5mil Polyimide Film with Silicone Adhesive

Many cus­tomers have request­ed whether CAPLINQ can offer thin­ner poly­imide tapes. CAPLINQ is pleased to announce LINQTAPE PIT0.5S a 0.5mil (13 micron) Poly­imide Film with a 1mil (25 micron) sil­i­cone adhe­sive.

LINQTAPE PIT1S has a back­ing thick­ness of 1mil (25 micron) and the adhe­sive lay­er adds anoth­er 1.5 mil (36micron) for an over­all thick­ness of 2.5mil (60 micron). The new PIT0.5S has a back­ing thick­ness of 0.5mil (13 micron) + 1mil (25 micron) adhe­sive lay­er for an over­all thick­ness of 1.5 mil (38 micron).

This prod­uct is only avail­able to reg­is­tered users (cus­tomers can be added man­u­al­ly after reg­is­tra­tion) but the price is the same as LINQTAPE PIT1S.

To pre­pare a tape with an over­all thick­ness of 25 micron could be pos­si­ble, but the min­i­mum order quan­ti­ty would be one mas­ter roll of 20″ (510mm) width or the equiv­a­lent of about 20 rolls of 1 inch (25.4mm) tape.

For more infor­ma­tion about our poly­imide tapes and films or any oth­er of our spe­cial­i­ty tapes, vis­it us or con­tact us for more details.

About Chris Perabo

Chris is an energetic and enthusiastic engineer and entrepreneur. He is always interested in taking highly technical subjects and distilling these to their essence so that even the layman can understand. He loves to get into the technical details of an issue and then understand how it can be useful for specific customers and applications. Chris is currently the Director of Business Development at CAPLINQ.

Leave a Reply

Your email address will not be published. Required fields are marked *