• x

LINQCELL GDL1500 | 1.5mm Carbon Plate

Harmonization Code : 6815.10.10.00 |   Articles of stone or of other mineral substances, not elsewhere specified or included; Non-electrical articles of graphite or other carbon; Carbon fibres and articles of carbon fibres
Main features
  • 1.5mm - 1500um - 59mil
  • Alternative to 6060
  • Graphitized Carbon Plate

Product Description

LINQCELL GDL1500 is a graphitized carbon plate, commonly used as a gas diffusion layer and electrode for fuel cells. Its through plane resistance is less than 13.5 mΩcm2. The thickness is 1.5mm and is measured at 50 kpa. This material has been successfully used in assemblies for hydrogen production electrolyzer components as a gas diffusion layer and electrode.

LINQCELL GDL1500 with a density of ±0.60 g/cm3 is a close, almost direct, alternative to the highly popular and discontinued Spectracarb 6060. Compared to it it has a resistivity of 90mΩ-cm instead of 100mΩ-cm. Shortly, we should be able to die cut circles and most designs that you might require.

Product Family
GDL1500  
40 x 40 cm

Catalog Product

Unlike other products we offer, the products listed on this page cannot currently be ordered directly from the website.
Packaging
TDS, SDS & Technical documents

Technical Specifications

General Properties
Basis Weight
Basis Weight
Basis weight refers to the weight measured in pounds off 500 sheets of paper in that paper’s basic sheet size.
 858 g/m2
Density
Density
Volumetric mass per unit
 0.60 kg/m3
Total Thickness
Total Thickness
Total thickness is taking into account all the films, coatings, adhesives, release liners and special layers and is the maximum thickness of a film or tape.
 1500 μm
Electrical Properties
Through Plane Resistivity
Through Plane Resistivity
Resistance of the amount of current through a material
 90.6 mΩcm
TP Resistance
TP Resistance
Opposition to the flow of electric current.
 13.3 mΩcm2
Voltage loss 24.5 mV