• x

HT 5000 | One part Hybrid Thermal Gel

Harmonization Code : 3824.99.96.99 |   Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included : Other : Other: Other
Main features
  • Gray
  • 5 Thermal Conductivity
  • High Thermal performance

Product Description

Honeywell HT5000 silicone based one-part thermal gel - Gap Filler provides a thermal conductivity of 5.0 W/m·K along with high conformability and high compressibility. It is one of the most popular thermal gels, formulated to deliver high dispense rates for improved productivity, long-term reliability performance and easy reworkability. The thickness range to prevent slumping in vertical position is 0.3-1.5mm. This is a non factor when components are mounted horizontally.

Honeywell HT5000 is designed to minimize thermal resistance at interfaces, maintain excellent performance through reliability testing, and provide scalable application at a competitive cost. The minimum bondline thickness that it can reach is 0.05mm with a Thermal Impedance of 0.25. Additionally it performs great in oil,crack and slump testing and it exhibits no pump out and cracking risk.

Honeywell HT5000 has a flow rate above 10 g/min, high breakdown strength (above 5 kV/mm) and very low out gassing (below 0.5%)

Product Family
300cc Al cartridge

Catalog Product

Unlike other products we offer, the products listed on this page cannot currently be ordered directly from the website.
Shipping in 8 - 12 weeks Shipping in 8 - 12 weeks

Technical Specifications

General Properties
The color
Specific Gravity
Specific Gravity
Specific gravity (SG) is the ratio of the density of a substance to the density of a reference substance; equivalently, it is the ratio of the mass of a substance to the mass of a reference substance for the same given volume.

For liquids, the reference substance is almost always water (1), while for gases, it is air (1.18) at room temperature. Specific gravity is unitless.
Shelf Life
Shelf Life
Shelf life is the amount of time after manufacturing that a product is guaranteed to retain its properties.

It differs vastly per product and it is based on temperature and storage conditions.

The properties can be guaranteed for the temperature and time range indicated on the TDS since those are the ones tested to be the best for the product.
Shelf Life @ 25°C 365 days
Thermal Properties
Thermal Conductivity
Thermal Conductivity
Thermal conductivity describes the ability of a material to conduct heat. It is required by power packages in order to dissipate heat and maintain stable electrical performance.

Thermal conductivity units are [W/(m K)] in the SI system and [Btu/(hr ft °F)] in the Imperial system.
5 W/m.K
Thermal Impedance 0.25 °C·cm²/W

Additional Information

HT5000 - Oil bleeding comparison


HT5000 - Crack and Slump testing


Minimum BLT for HT 5000 is around 0.15mm. Maximum BLT is a function of the size of the components being attached and pressure. A reasonable value could be 1mm