Specialty Chemicals, Adhesives & Plastics
Only signed in users will see discount codes and have complete access to product lines, datasheets and pricelists
LINQSTAT XVCF-3S150 is a highly conductive conductive polyethylene film with a very high electrically conductive carbon loading and a very dense polymer mix. Having a surface resistance of ±150 ohms/sq, this extra loading allows the film to be used in applications that require a lower resistivity. The volume resistivity still needs to be tested. This is a product that is under development and will have large MOQs for the first batches. We already have a very close alternative with 3.5S200 that should work great for most applications. If you can work with Polyurethane films then we can go as low as 10 ohms/square. Contact us for more information.
XVCF-3S150 conductive films are thin (0.07mm or 3 mil), lightweight and relatively inert. Furthermore, they are well suited for applications requiring electrochemical reactions, high conductivity or charge storage including but not limited to electrodes (ECG, TENS, Defibrillation and Iontophoresis), batteries (flat-cell zinc/manganese dioxide (MnO2), Lithium Ion and Lithium polymer), wearable electronics and digital whiteboards.
XVCF-3S150 film and its conductivity are unaffected by humidity and age. The film is heat sealable, flexible and offers exceptional abrasion resistance. The film gives good thermal stability and has outstanding chemical resistance. It has a standard thickness of 76µm (3 mil) and is available in various lengths and widths upon request. This is the most conductive plastic film in our entire product line.
Given its low surface resistance, LINQSTAT XVCF films have been successfully used as a pressure sensor making them useful for applications that require more conductivity to be able to detect more subtle pressure differences.
Due to its low-resistivity and its resistance to a range of chemicals and alcohols, these films are suitable for use in electrodes. Their matte finish allows them to be printed on, and the low material thickness makes them flexible to adapt well to a range of contours.
These films have a higher carbon loading than our standard VCF-Series films. This higher carbon loading gives us a lower resistance and as such, a higher conductivity. We come to a physical limit on how much carbon this plastic can be loaded before other properties are adversely affected, and so to get even more conductivity, we need to go to a more dense polymer matrix as we have done with our XVCF-ALS series films. The result of this denser matrix is a higher conductivity and better mechanical properties.
We have recently changed our SKUS. To help you search for them either on google or on our website here's a before and after table. As you can see we went for the "Product codes that make sense" approach: