LOCTITE ABLESTIK CDF 625P

Harmonization Code : 7115.90.00.00 |   Other articles of precious metal or of metal clad with precious metal : Other
Main features
  • Electrically conductive
  • Thermally conductive
  • Low warpage

Product Description

LOCTITE® ABLESTIK CDF 625P silver filled, die attach adhesive film is the most universal film, compatible with pre-cut wafer lamination equipment, recommended for large die applications. It is suitable for bonding integrated circuits and components with low warpage and good adhesion (>5MPA) on laminates and metal finishes. Furthermore, it has the lowest total cost of ownership and covers a wide die size range up to 10x10mm.

LOCTITE® ABLESTIK CDF 625P has a broad application space with controlled 25um bondline and a low modulus that is very close to Ablestik 8322A (2000 MPa @ RT, 40 MPa @ 250C.). This conductive die attach film can be effectively used for other applications and can also be a potentially replacement for QMI519.

Cure Schedule

  • 30 minute ramp to 100°C + 30 minutes @ 100°C +
  • 30 minute ramp to 175°C + 1 hour @ 175°C
Product Family
CDF625P  
8 inch circles
10 25

Catalog Product

Unlike other products we offer, the products listed on this page cannot currently be ordered directly from the website.

Technical Specifications

General Properties
Shelf Life
Shelf Life
Shelf life is the amount of time after manufacturing that a product is guaranteed to retain its properties.

It differs vastly per product and it is based on temperature and storage conditions.

The properties can be guaranteed for the temperature and time range indicated on the TDS since those are the ones tested to be the best for the product.
Shelf Life @ 5°C 365 days
Work life @25°C
Work life @25°C
Work life is the amount of time we have to work with a material until it is no longer able to be easily worked and applied on a substrate.

It is based on the change in viscosity and it can rely on the application requirements.
1440 hours
Mechanical Properties
Shear strength
Shear Strength @250°C 1.7 N/mm2
Tensile Modulus
Tensile Modulus
Tensile modulus is a mechanical property that measures the stiffness of an elastic material. It is the slope of stress / strain curve of a material under direct tensile loading.

It can be used to predict the elongation or elastic deformation of an object as long as the stress is less than the tensile strength of the material. Elastic deformation is caused by stretching the bonds between atoms and the deformation can be reversed when the load is removed.

Tensile modulus is affected by temperature and is an important engineering attribute since we generally want to keep elastic deformation as small as possible.
Tensile Modulus @25°C 3,000 N/mm2
Tensile Modulus @250°C 40 N/mm2
Electrical Properties
Volume Resistivity
Volume Resistivity
Volume resistivity, also called volume resistance, bulk resistance or bulk resistivity is a thickness dependent measurement of the resistivity of a material perpendicular to the plane of the surface.
8.0x10-3 Ohms⋅cm
Thermal Properties
Coefficient of Thermal Expansion (CTE)
Coefficient of Thermal Expansion (CTE)
CTE (Coefficient of thermal expansion) is a material property that is indicative of the extent to which a material expands with a change in temperature. This can be a change in length, area or volume, depending on the material.

Knowing the CTE of the layers is helpful in analyzing stresses that might occur when a
system consists of an adhesive plus some other solid component.
Coefficient of Thermal Expansion (CTE), α1
Coefficient of Thermal Expansion (CTE), α1
CTE α1 (alpha 1) is the slope of the Coefficient of thermal expansion in a temperature range below the Glass transition temperature (Tg).

It explains how much a material will expand until it reaches Tg.
75 ppm/°C
Coefficient of Thermal Expansion (CTE), α2
Coefficient of Thermal Expansion (CTE), α2
CTE α2 (alpha 2) is the slope of the Coefficient of thermal expansion in a temperature range above the Glass transition temperature (Tg).

It explains the extent to which a material will expand after it passes Tg.
320 ppm/°C
Glass Transition Temperature (Tg)
Glass Transition Temperature (Tg)
The glass transition temperature for organic adhesives is a temperature region where the polymers change from glassy and brittle to soft and rubbery. Increasing the temperature further continues the softening process as the viscosity drops too. Temperatures between the glass transition temperature and below the decomposition point of the adhesive are the best region for bonding.

The glass-transition temperature Tg of a material characterizes the range of temperatures over which this glass transition occurs.
-5 °C
Thermal Conductivity
Thermal Conductivity
Thermal conductivity describes the ability of a material to conduct heat. It is required by power packages in order to dissipate heat and maintain stable electrical performance.

Thermal conductivity units are [W/(m K)] in the SI system and [Btu/(hr ft °F)] in the Imperial system.
1 W/m.K

Additional Information

How is CDF 625P packaged and "rolled?


Henkel has worked with its suppliers to improve the Conductive Die Attach Film (cDAF) product line by developing an edge tape layer to mitigate the occurrence of impression marks.
Two “Edge Tapes” are applied acting like a shim to reduce the contact pressure on the adhesive circles and potential impression marks on the roll. As these 2 “Edge Tapes” are applied outside of the functional CDF 625P adhesive circle, there’s no impact on Fit, Form, or Function! This makes this a major improvement without any effect to your current process.
 
 

CDF 600P - Die attach film property comparison