DMI-3006 Negative Type Solvent Developed Photosensitive Modified Polyimide Stress Buffer Coating

Harmonization Code : 3707.90.90.00 |   Chemical preparations for photographic uses (other than varnishes, glues, adhesives and similar preparations); unmixed products for photographic uses, put up in measured portions or put up for retail sale in a form ready for use : Other : Other
Main features
  • No warpage of silicone wafer
  • UV cured, no hard bake required
  • Excellent dielectric properties

Product Description

DMI’s stress buffer coating is a negative type, solvent developed, photosensitive polyimide based precursor for stress buffer applications.

DMI’s photosensitive polyimide coating  uses a modified polymide which outperforms industry standards because of its very low cure temperature and very low modulus. These two qualities ensure that there is minimum wafer warpage of the silicon wafer.

DMI’s photosensitive polyimide coating  also guarantees excellent cured film properties such as great electrical performance because of its high dielectric strength and constant. The coating has a very low moisture absorption and high elongation giving it its high reliability.

DMI's photosensitive polyimide coating's main application is as a stress buffer or wafer buffer layer in wafer level packaging (WLP). The coating's low cure temperature and high dielectric strength ensure excellent performance as stress buffer in wafer level packaging. Other applications include post passivation layers for solder bumping or dielectric layer in wafer level packages.

Product Family
DMI-3006  
1Kg Jar

Catalog Product

Unlike other products we offer, the products listed on this page cannot currently be ordered directly from the website.

Technical Specifications

Chemical Properties
Moisture absorption 0.1 %
Water Absorption 0.1 %
Mechanical Properties
Elongation
Elongation
Elongation is the process of lengthening something.

It is a percentage that measures the initial, unstressed, length compared to the length of the material right before it breaks.

It is commonly referred to as Ultimate Elongation or Tensile Elongation at break.
62 %
Storage (DMA) Modulus
Storage (DMA) Modulus @ 25°C 100 N/mm2
Tensile Strength
Tensile Strength
The tensile strength of a material is the maximum amount of tensile stress that it can withstand while being stretched or pulled before failure.

Some materials break very sharply, without plastic deformation, in what is called a brittle failure. Others, which are more ductile, including most metals, experience some plastic deformation and possibly necking before fracture.
Tensile Strength
Tensile Strength
Tensile strength determines the resistance of a material to break under tension and it measures how much elongating load (or tensile stress) it can handle before fracture.

To make it simple, it measures how much force we have to apply when pulling apart a material before it breaks.
8.1358 MPa
Thermal Properties
Coefficient of Thermal Expansion (CTE)
Coefficient of Thermal Expansion (CTE)
CTE (Coefficient of thermal expansion) is a material property that is indicative of the extent to which a material expands with a change in temperature. This can be a change in length, area or volume, depending on the material.

Knowing the CTE of the layers is helpful in analyzing stresses that might occur when a
system consists of an adhesive plus some other solid component.
Coefficient of Thermal Expansion (CTE), α1
Coefficient of Thermal Expansion (CTE), α1
CTE α1 (alpha 1) is the slope of the Coefficient of thermal expansion in a temperature range below the Glass transition temperature (Tg).

It explains how much a material will expand until it reaches Tg.
164 ppm/°C
Coefficient of Thermal Expansion (CTE), α2
Coefficient of Thermal Expansion (CTE), α2
CTE α2 (alpha 2) is the slope of the Coefficient of thermal expansion in a temperature range above the Glass transition temperature (Tg).

It explains the extent to which a material will expand after it passes Tg.
222 ppm/°C
Decomposition Temperature 446 °C
Glass Transition Temperature (Tg)
Glass Transition Temperature (Tg)
The glass transition temperature for organic adhesives is a temperature region where the polymers change from glassy and brittle to soft and rubbery. Increasing the temperature further continues the softening process as the viscosity drops too. Temperatures between the glass transition temperature and below the decomposition point of the adhesive are the best region for bonding.

The glass-transition temperature Tg of a material characterizes the range of temperatures over which this glass transition occurs.
54 °C

Additional Information

We would like to pattern the DMI-3006. Do we need the R1247 developer or can we use a mixture of conventional solvents?

 

We can supply the material but we would prefer if you prepared your own supply for two reasons:

  1. You likely have these solvents in your inventory
  2. Shipping flammable solvents is very expensive

The R1247 is a simple mixture of 85 wt. % cyclopentanone (a common solvent used for developing) and 15 wt. % ethanol. We just add the two solvents to a container and shake to blend them together. We have found that pure cyclopentanone is a little too aggressive to the DMI-3006 so blending with ethanol reduces its nature.