• x

MCL-C11 | Melamine Compression Cleaning Tablets

Harmonization Code : 3909.20.00.90 |   Amino-resins, phenolic resins and polyurethanes, in primary forms : Melamine resins : Other
Main features
  • 3.6% Formaldehyde
  • Compression Grade
  • Suitable for EMC

Product Description

MCL-C11 is a compression-type melamine mold cleaning tablet designed for cleaning transfer molding equipment and epoxy molds. This melamine based cleaner is specially designed for cleaning epoxy mold compound residue from Packaging molds. It molds very easily and requires only a few shots to completely clean molds of all stains and residues. Its good workability improves productivity and reduces overall cleaning time. It takes around 2 - 5 minutes in 160 - 190℃ to take effect.

MCL-C11 is designed for the cleaning of mold stains deposited during EMC molding for encapsulation of leadframe products like capacitors, resistors or semiconductor IC chips. It exhibits excellent cleaning properties and has high adhesive strength since it is based on a melamine resin system which helps capture the stains and clean in fewer shots. This material comes in a variety of Tablets/Pellets sizes that can be laid over the mold equipment.

Product Family
MCL-C11  
Tablet
68 x 38 mm
1kg 10kg Box

Catalog Product

Unlike other products we offer, the products listed on this page cannot currently be ordered directly from the website.
Shipping in 4 - 8 weeks In stock

Technical Specifications

General Properties
Specific Gravity
Specific Gravity
Specific gravity (SG) is the ratio of the density of a substance to the density of a reference substance; equivalently, it is the ratio of the mass of a substance to the mass of a reference substance for the same given volume.

For liquids, the reference substance is almost always water (1), while for gases, it is air (1.18) at room temperature. Specific gravity is unitless.
1.4
Bulk Density
Bulk Density
The amount of a certain product that comes in a bulk.
1.2 g/cc
Appearance
Appearance
Appearance at room temperature.
White
Shelf Life
Shelf Life
Shelf life is the amount of time after manufacturing that a product is guaranteed to retain its properties.

It differs vastly per product and it is based on temperature and storage conditions.

The properties can be guaranteed for the temperature and time range indicated on the TDS since those are the ones tested to be the best for the product.
Shelf Life @ 5°C 365 days
Mechanical Properties
Hardness
Hardness
Hardness is a dimensionless quantity. There is no direct relationship between measurements in one scale and their equivalent in another scale or another hardness test.
Durometer (Shore D) 70
Curing Conditions
Mold Temperature 160 - 190 °C
Curing Schedule
Curing Schedule
Curing schedule is the time and temperature required for a mixed material to fully cure. While this applies to materials that cure with heat, there are also other materials that can be cured with UV.

Even though some materials can cure on ambient temperatures, others will require elevated temperature conditions to properly cure.

There are various curing schedules depending on the material type and application. For heat curing, the most common ones are Snap cure, Low temperature cure, Step cure and Staged cure.

Recommended cure type, schedule, time and temperature can always be found on the Technical data sheets.
Cure Time 2 - 5 min

Additional Information

Storage conditions

MCL C11 Melamine Cleaning tablets have a shelf life of 12 months if they are stored in a cooled environment.

Work life is 4 days after taking them out of storage.

 

Package types

Tablet Size 38 x 68mm
  50 x 50mm
  150 x 40mm
Tablet Weight 20 - 35g