Only signed in users will see discount codes and have complete access to product lines, datasheets and pricelists
MCL-T2000 is a transfer-grade melamine mold cleaning compound designed for cleaning transfer molding equipment and epoxy molds. MCL-T2000 molds very easily and effectively. Most cleaning processes need no more than three shots to completely clean molds of all stains and residues.
MCL-T2000 can be supplied in loose powder or as pellets or as mini-pellets for automold equipment.
MCL-T2000 is a transfer-grade melamine mold compound cleaner designed for the cleaning of mold stain deposited during the molding of epoxy molding compound for encapsulation of leadframe products like capacitors, resistors or semiconductor IC chips. If you require a Compression Grade Melamine Mold Compound, the kind that is used for other shapes likes coil windings, please contact us for more details.
Melamine Mold Cleaning can be accomplished by compression molding at the same condition as that of the epoxy molding compound. The recommended cleaning procedure is:
Step 1: Do 10 shots of Melamine at 175C for 300s (adjust mold conditions depending on results) Step 2: Do 3-5 shots of Mold conditioner at 175C for 180s
Step 3: Run 2 shots of dummy shots of epoxy molding compound Step 4: Resume production as usual
The material has a very short spiral flow and therefore, is only recommended for cleaning using a COMPRESSION MOLDING process. If a transfer mold cleaning process is desired, please contact us for a proper recommendation.