• x

NanoProof 7.0 Hydrophobic & Oleophobic Treatment

Harmonization Code : 2901.10.00.00 |   Acyclic hydrocarbons; Saturated
Main features
  • Award winning NanoProof Series
  • Provides basic protection for accidental water damage
  • ”Push through connectivity” capability

Product Description

Aculon® NanoProof® 7.0 is a surface treatment capable of imparting hydrophobicity and oleophobicity to a wide variety of surfaces in a simple, one-step process. It is designed for multi-surface treatment on metals, semiconductors, and polymers. Aculon® NanoProof® 7.0 is typically applied by dip, dispense, or flow treatment and results in a hydro/oleophobic film that is resistant to chemical degradation. It is specifically designed to protect electronic circuitry from immersion in water.

Features of Aculon's NanoProof 7.0

  • Creates moisture barriers on coated parts
  • Repels water, oil, and other liquid organic materials
  • Adheres to a variety of surfaces ensuring protection of PCBs
  • Push-through conductivity within 2 hours
  • Easy to apply
  • RoHS compliant
  • Contains no REACH SVHC compounds

Surface Preparation/ Cleaning Aculon's Nanoproof 7.0

Ensure that the surface is free of any grease, fingerprints, adhesive residues or dirt. This can be accomplished by first degreasing the surface with solvents or by rinsing with IPA. Depending on the sensitivity of your part to liquids Kyzen cleaners like Ionox I3416 or Cybersolv 141-R may be most appropriate for removing surface contamination. Contact Aculon if you are unsure what cleaner to use and we will recommend one best suited for your application. Substrates should be coated after cleaning as soon as possible to minimize the potential for recontamination

Treatment Application

Dispense: Dispense product over the surface. Apply enough material to coat the surface. Allow excess material to drain.

Dip: Immerse the substrate in the solution for 20 seconds, air dry till solvent evaporated. Recommended dip containers are stainless steel, glass or aluminum. Plastic containers are likely to contaminate the treatment solution reducing performance.

Drying: Air dry at room temperature until the solvent evaporates. In some cases additional thermal curing (e.g. 100C for 5 minutes) will speed solvent evaporation. Treatment will be deformable by touch during solvent evaporation, thus care should be taken when handling the part so as to not disturb the treatment in sensitive areas. After solvent evaporation treatment will be rigid.

Masking: Expect all masks to be compatible. For example: Techspray WonderMASK PX Peelable Solder Mask (2222-8SQ), Kapton Conformal Coating Tapes, Mylar tape, Polyimide Testing

For Hydrophobicity: Allow droplets of water to fall onto the surface, they should bead up to a contact angle >90⁰. If the surface is not hydrophobic clean the surface again and reapply.

Read More
Product Family
NanoProof 7.0-Series  
1l Bottle

Catalog Product

Unlike other products we offer, the products listed on this page cannot currently be ordered directly from the website.
Shipping in 2 - 4 weeks Shipping in 2 - 4 weeks

Technical Specifications


Additional Information

NanoProof Series Comparison Table
NanoProof Series Product Description Effectiveness Thickness Deformable Sprayable Conductivity Price
Aculon Products
Sold and Serviced by Caplinq Corporation
NanoProof 1.0 Hydrophobic TMC based coating in hydrocarbon solvent Good <200nm when sprayed - Yes Make electrical contact through barrier $$
NanoProof 3.5 Hydrophobic/oleophilic siloxane based coating in hydrocarbon solvent Better 10-15μm when sprayed20-25μm when dispensed After solvent evaporation Yes Allows for push through conductivity $$
NanoProof 4.0 Hydrophobic/oleophilicsiloxane based coating inhydrocarbon solvent Even better 10-15μm when sprayed20-25μm when dispensed After solvent evaporation Yes Allows for push throughconductivity $$$
NanoProof 5.1 Hydrophobic/oleophilicfluoroacrylate basedcoating in fluorosolvent Best 56μm when dispensed During solvent evaporation Yes Allows for push throughconductivity $$$$