• English
  • USD
  • Cart empty
    View Cart
    Shopping cart overview
    Your Cart is currently empty.
  • x

Polyimide Tapes and Films

CAPLINQ is proud to be a supplier of its own LINQTAPE™ PIT-Series

AVAILABLE DIRECTLY AT CAPLINQ.COM

Polyimide Tapes and Films

Polyimide Film, Polyimide Tape and Generic Kapton® Products

CAPLINQ is proud to be a supplier of its own LINQTAPE™ PIT-Series brand of high-performance, flexible, high-temperature resistant polyimide film for many high temperature applications. Polyimide is preferred over polyester for many high-temperature applications. These applications include but are not limited to semiconductor, smartcard, electronic, automotive and general manufacturing industries.

High Temperature Resistant Polyimide Film

LINQTAPE™ PIT-Series polyimide films are generic versions of DuPont's Kapton® film. As such, they are very stable at high temperatures, have excellent dielectric insulation properties, are mechanically solid without being too rigid and can withstand a wide range of chemicals and solvents. LINQTAPE polyimide films can be used in applications that may see temperatures up to 260°C (500°F).

LINQTAPE™ PIT-Series polyimide films typically come in 33 meter (36 yard) length rolls of varying widths. The base polyimide film (backing) thickness range is between 1-mil (25µm) and 5-mil (125µm) thick. Other widths, lengths and thicknesses may be available upon request.

High Temperature Resistant Polyimide Tape

LINQTAPE™ PIT-Series polyimide tapes start with a LINQTAPE polyimide film base and then an adhesive layer is applied to it. The base material itself has the same high temperature resistance, and dielectric properties described above, but the adhesive type and properties plays an important role in the selection process of a polyimide tape.

For high temperature applications, silicone is the adhesive of choice for polyimide tapes because it has the highest temperature resistance and maintains its adhesion the most when exposed to higher temperatures. In applications where silicone can absolutely not be used, or in applications that require a higher room-temperature adhesion is needed, CAPLINQ offers an acrylic adhesive version of polyimide tape. The range of polyimide tapes we offer has grown over the years as customers requested anti-static versions of adhesives, adhesives that left no residue after removal or very thin layers of adhesive.

LINQTAPE™ PIT-Series polyimide tapes typically come in 33 meter (36 yard) length rolls of varying widths. See the tape below for the range of polyimide tapes we currently offer. Other widths, lengths, thicknesses or adhesive types may be available upon request.

Read More about Polyimide Tapes and Films
Categories
Filters
Filters
Compare Products
  • Recommended
  • Price Low > High
  • rice High > Low
63 products
Compare Products
  • Recommended
  • Price Low > High
  • rice High > Low
63 products

Product Selector Guide

Polyimide Tape & Film
CAPLINQ
Part#		X-Section
(click to enlarge)		Adhesive Type
[A]		Thickness in mil (um)Peel Strength
N/25mm
(oz/in)		Remarks
Polyimide Backing Film
[B]		Total
[C]
Top of Page
® Kapton is a registered trademark of DuPont (E. I. du Pont de Nemours and Company)
Linqtape Polyimide Tape & Film
Standard Length of Rolls is 36 yards (33 meters)
0.5 mil HN Polyimide Film | No Adhesive
PIT0.5N		   None 0.5mil (12.5µm) ± 0.5mil (12.5µm) N/A No Adhesive, just very thin polyimide film
Breakdown Voltage > 1500V
0.5 mil HN Polyimide Tape | 0.5 mil Silicone Adhesive
PIT0.5S-UT		   Silicone 0.5mil (13µm) ± 1.0mil (25µm) 3.3 (12) Thinnest polyimide tape on the market - 1 mil total thickness
Very Thin, High-Temperature Tape. Breakdown Voltage >1,500V
0.5 mil HN Polyimide Tape | Silicone Adhesive
PIT0.5S		   Silicone 0.5mil (13µm) ± 1.5mil (38µm) 3.3 (12) Very Thin Polyimide Tape
Breakdown Voltage >1,500V
1 mil HN Polyimide Film | No Adhesive
PIT1N		   None 1mil (25µm) ± 1mil (25µm) N/A No Adhesive, Just 1-mil Polyimide Film
Breakdown Voltage >6000V
1 mil HN Polyimide Tape | Silicone Adhesive
PIT1S		   Silicone 1mil (25µm) ± 2.5mil (63µm) 7.1 (26) Industry Standard Polyimide Tape with Silicone

Breakdown Voltage >6000V
1 mil HN Polyimide Tape | Acrylic Adhesive
PIT1A		   Acrylic 1mil (25µm) ± 2.5mil (63µm) 7.1 (26) 1-mil non-silicone Polyimide Tape
Breakdown Voltage >6000V
2 mil HN Polyimide Film | No Adhesive
PIT2N		   None 2mil (50µm) ± 2mil (50µm) N/A 2-mil Thick Polyimide Film with no Adhesive
Breakdown Voltage >10,000V
2 mil HN Polyimide Film | Acrylic Adhesive
PIT2A		   Acrylic 2mil (50µm) ± 2mil (50µm) 7.1 (26) 2-mil Thick Polyimide Film with Acrylic Adhesive
Breakdown Voltage >10,000V
1 mil HN Polyimide Tape | Anti-Static Acrylic Adhesive
PIT1A-ESD		   Acrylic 1mil (25µm) ± 2.5mil (63µm) 7.1 (26) 1-mil Anti-static ESD Polyimide Tape with Acrylic Adhesive
Breakdown Voltage >10,000V
2 mil HN Polyimide Tape | Silicone Adhesive
PIT2S		   Silicone 2mil (50µm) ± 3.5mil (89µm) 7.1 (26) Thicker Standard Polyimide Tape
Breakdown Voltage >10,000V
2 mil HN Polyimide Tape | Silicone Adhesive on Release Liner
PIT2S-RL		   Silicone 2mil (50µm) ± 5mil (125µm) 7.1 (26) High temperature Polyimide Tape on Release Liner
Used for high-temperature Dicing Tape
1 mil HN Polyimide Tape | Acrylic Adhesive on Release Liner
PIT1A-RL		   Acrylic 1mil (25µm) ± 2.5mil (63µm) 7.1 (26) High temperature Polyimide Tape on Release Liner
Used for high-temperature Dicing Tape
1 mil HN Polyimide Tape | Silicone Adhesive on Release Liner
PIT1S-RL		   Silicone 1mil (25µm) ± 2.5mil (63µm) 7.1 (26) High temperature Polyimide Tape on Release Liner
Used for high-temperature Dicing Tape
2 mil HN Polyimide Tape | Acrylic Adhesive on Release Liner
PIT2A-RL		   Acrylic 2mil (50µm) ± 5mil (125µm) 7.1 (26) High temperature Polyimide Tape on Release Liner
Used for high-temperature Dicing Tape
5 mil HN Polyimide Film | No Adhesive
PIT5N		   None 5mil (125µm) ± 5mil (125µm) N/A Heavy Duty 5-mil thick Polyimide Film
Breakdown Voltage >15,000V.
1 mil HN Polyimide Tape | Silicone Adhesive Double-Sided | Double Release Liner
PIT1SD-2RL		   Silicone 1mil (25µm) ± 10mil (250µm) 7.1 (26) Double-Sided Polyimde Tape & Release Liner on BOTH sides
Breakdown Voltage > 3000V
1 mil HN Polyimide Tape | Anti-Static Silicone Adhesive
PIT1S-ESD		   Silicone 1mil (25µm) ± 2.5mil (63µm) 5.3 (19) 1-mil Anti-static ESD Polyimide Tape with Silicone Adhesive
Breakdown Voltage >10,000V
1 mil HN Polyimide Tape Dots | Anti-Static Silicone Adhesive
PIT1S-C-ESD		   Silicone 1mil (25µm) ± 2.5mil (63µm) 5.3 (19) 1 mil Polyimide Tape Dots with Anti-Static Silicone Adhesive
Anti-Static Polyimide Dots
1 mil Black HN Polyimide Tape | Acrylic Adhesive
PIT1A-Black		   Acrylic 1mil (25µm) ± 2.5mil (63µm) 7.1 (26) 1 mil Black Polyimide Tape with Acrylic Adhesive
Black
1 mil Black XC ESD Conductive Polyimide Tape | Acrylic Adhesive
PIT1A-ESD-Black		   Silicone 1mil (25µm) ± 2.5mil (63µm) 7.1 (26) 1mil Black Anti-static Polyimide Tape
Alternative to Kapton XC with Acrylic Adhesive
1 mil FN Polyimide Film | 0.1mil FEP Both Sides No Adhesive
PIT1N-FEP616		   None 1mil (25µm) ± 1mil (25µm) N/A 1mil FN Polyimide Film with 0.1mil FEP on Both Sides
Alternative to Kapton 120FN616
1 mil FN Polyimide Film | 0.5mil FEP on One Side No Adhesive
PIT1N-FEP019		   None 1mil (25µm) ± 1mil (25µm) N/A 1mil FN Polyimide Film with 0.5mil FEP on One Side
Alternative to Kapton 150FN019
1 mil FN Polyimide Film | 0.5mil FEP Both Sides No Adhesive
PIT1N-FEP029		   None 1mil (25µm) ± 1mil (25µm) N/A 1mil FN Polyimide Film with 0.5mil FEP on Both Sides
Alternative to Kapton 250FN029
1 mil Aluminized Polyimide Tape | Acrylic Adhesive
PIT1A-Alum		   Acrylic 1mil (25µm) ± 2.5mil (63µm) 7.1 (26) 1 mil Aluminized Polyimide Tape with Acrylic Adhesive
Aluminized
1mil Polyimide Film with Sputtered Aluminized Coating
PIT1N-Alum		   None 1mil (25µm) ± 1mil (25µm) N/A 1 mil Aluminized Polyimide Film with no Adhesive
Sputtered aluminum layer 0.004mil (0.1µm) applied using an aluminum vacuum deposition
1 mil White Polyimide Film | No Adhesive
PIT1N-WL-G		   None 1mil (25µm) ± 1mil (25µm) N/A 1 mil White Polyimide Film with no Adhesive
White Label, Gloss Finish
1 mil White Polyimide Tape | Acrylic Adhesive
PIT1A-WL-SG		   Acrylic 1mil (25µm) ± 2.5mil (63µm) 3.9 (14) 1 mil White Polyimide Tape with Acrylic Adhesive
White Label, Semi-Gloss Finish
1 mil White Polyimide Tape | Acrylic Adhesive
PIT1A-WL-G		   Acrylic 1mil (25µm) ± 2.5mil (63µm) 3.9 (14) 1 mil White Polyimide Tape with Acrylic Adhesive
White Label, Gloss Finish
2 mil White Polyimide Tape with Acrylic Adhesive
PIT2A-WL-SG		   Acrylic 2mil (50µm) ± 3.5mil (89µm) 3.9 (14) 2 mil White Polyimide Tape with Acrylic Adhesive
White Label, Semi-Gloss Finish
2 mil White Polyimide Tape | Acrylic Adhesive
PIT2A-WL-G		   Acrylic 2mil (50µm) ± 3.5mil (89µm) 3.9 (14) 2 mil White Polyimide Tape with Acrylic Adhesive
White Label, Gloss Finish
2 mil White Polyimide Film | No Adhesive
PIT2N-WL-SG		   None 2mil (50µm) ± 2mil (50µm) N/A 2 mil White Polyimide Film with no Adhesive
White Label, Semi-Gloss Finish
2 mil White Polyimide Film | No Adhesive
PIT2N-WL-G		   None 2mil (50µm) ± 2mil (50µm) N/A 2 mil White Polyimide Film with no Adhesive
White Label, Gloss Finish
1 mil HN Polyimide Tape | Silicone Adhesive Double-Sided on Release-Liner
PIT1SD		   Silicone 1mil (25µm) ± 7mil (175µm) 7.1 (26) 1 mil Polyimide Tape with Silicone Adhesive Double-Sided
3-mil PET Release Liner on Single Side
2 mil HN Polyimide Tape | Silicone Adhesive Double-Sided on Release Liner
PIT2SD		   Silicone 2mil (50µm) ± 8mil (200µm) 6.3 (23) 2 mil Polyimide Tape with Silicone Adhesive Double-Sided
3-mil PET Release Liner on Single Side
5 mil HN Polyimide Tape | Silicone Adhesive
PIT5S		   Silicone 5mil (125µm) ± 6.5mil (165µm) 7.1 (26) Heavy-Duty 5 mil Polyimide Tape with Silicone Adhesive
Breakdown Voltage >15,000V

Frequently Asked Questions

Frequently Asked Questions about Polyimide Tapes and Films

What is the difference between polyimide and Kapton?

DuPont were the original inventors of polyimide tape in the 1960's. They patented their product as Kapton tape. The patent for Kapton expired a long time ago, and the generic name version of the product is polyimide. DuPont continue to supply their Kapton tape under their brand name at a premium, but in reality, the material properties are exactly the same as polyimide.

Can I order a polyimide tape or film in a width other than what you have on your website?

Yes. Polyimide tapes and films are cut to width based on customer requests. For tapes the thinnest width we can reliably cut in 3mm (1/8 inch) wide, for film this is 6.5mm (1/4 inch) and for both tape and film the widest is the jumbo roll width of 508mm (20 inch). Otherwise, please ask us for any specific width you need. Minimum order quantities may apply.

What is the difference in operating temperature range for the different kinds of polyimide tape?

The operating temperature range of our polyimide films is between -269°C (-452°F) and 260°C (500°F). For the different types of tape this range is limited because of the specifications of the adhesive used. Our polyimide tapes with silicone adhesive have an operating temperature range between -73°C (-100°F) and 260°C (500°F). Our polyimide tapes with acrylic adhesive have an operating temperature range between -30°C (-22°F) and 175°C (347°F).

How can I apply your pressure sensitive tapes?

All our adhesives used for our polyimide tapes are pressure sensitive adhesives (PSA). This means they form a bond between two surfaces solely by surface contact, which is achieved by light external pressure to the adhesive or surfaces. PSA's are dry adhesives that can be applied at room temperature and require no activation with water, solvent or heat. Another advantage is that they adhere instantly saving time in production processes.

Can I order a polyimide tape or film in a thickness other than what you have on your website?

Yes. Most of our polyimide tapes and films are available in a range of standard thicknesses; 12.7 micron (0.5 mil), 25.4 micron (1 mil), 50.8 micron (2 mil), 38.1 micron (3 mil), 127 micron (5 mil) and 254 micron (10 mil). The thinnest we can manufacture is 12.7 micron (1/2 mil) thick, thickest is 254 micron (10 mil) thick. Otherwise, please ask us for any specific thickness you need. Minimum order quantities may apply.

Learn More

Compare all Polyimide Film or Polyimide Tapes

Polyimide film and tape vary widely in their composition and application. Polyimide tapes may have silicone or silicone-free or adhesive, whereas polyimide film has no adhesive. Polyimide film can be as thin as 0.5 mil or as thick as 5 mil. Polyimide tape can be single-sided or double-sided and may come with or without release liner. Our Polyimide Tape and Polyimide Film Selector tool can help you choose the right polyimide tape for your application.

Polyimide Tape, Polyimide Film, on Compare Background
Use Polyimide Film Compare Tool

Polyimide Tape Technical Papers and Brochures

Polyimide Tape Technical Papers, Polyimide Film Marketing Brochures, Polyimide Tape and Polyimide Film Technical Data Sheets, Polyimide Tape MSDS. If these are what you are looking for, then this is where you should be.

Technical Datasheets of Polyimide Tape and Polyimide Film
Check out our Literature

Read our Blog on Polyimide Film and Tape

Everyday, people just like you have questions about polyimide tape and film. At CAPLINQ, we try to help people just like you by blogging about polyimide films. From polyimide film pricing to harmonization codes to product part numbers and leadtimes. We try to post as much information as we can on our blogs, to help you find more relevant information about polyimide film.

Polyimide Tape and Film Blog
Read our Polyimide Film Blog