• x

TGP6000 | Thermal Gap Pad

Harmonization Code : 3824.99.96.99 |   Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included : Other : Other: Other
TGP6000 | Thermal Gap Pad
TGP6000 | Thermal Gap Pad
TGP6000 | Thermal Gap Pad
Main features
  • 0.25 Thermal Impedance
  • 6.0 Thermal Conductivity
  • Excellent surface wetting

Product Description

Honeywell's TGP6000 Thermal Gap Pads (TGP) exhibit exquisite thermal and electrical properties.With a Thermal conductivity of 6 W/mK and a Dielectric constant of 8.5 they are designed to minimize thermal resistance at interfaces, and maintain excellent electrical performance through extensive reliability testing. They have excellent surface wetting designed for low contact resistance.

Honeywell's TGP6000 is naturally tacky, and requires no additional adhesive which could inhibit thermal performance. 

 

Thickness range:

  • 0.5-5.0mm with 0.25mm incremental

Thickness Tolerance: >1mm, ±10%

  • 0.5-1mm, ±0.1mm
  • <0.5mm, ±0.05mm

 

Product Family
TGP6000  
457 x 457 x 1.0mm Pad

Catalog Product

Unlike other products we offer, the products listed on this page cannot currently be ordered directly from the website.
Not Available Shipping in 4 - 8 weeks
Packaging
TDS & SDS
Compare product

Technical Specifications

General Properties
Specific Gravity
Specific Gravity
Specific gravity (SG) is the ratio of the density of a substance to the density of a reference substance; equivalently, it is the ratio of the mass of a substance to the mass of a reference substance for the same given volume.

For liquids, the reference substance is almost always water (1), while for gases, it is air (1.18) at room temperature. Specific gravity is unitless.
 3.3
Color
Color
The color
 Grey
Film Thickness 0.5 - 5 mm
Mechanical Properties
Hardness
Hardness
Hardness is a dimensionless quantity. There is no direct relationship between measurements in one scale and their equivalent in another scale or another hardness test.
Durometer (Shore 00) 40
Electrical Properties
Volume Resistivity
Volume Resistivity
Volume resistivity, also called volume resistance, bulk resistance or bulk resistivity is a thickness dependent measurement of the resistivity of a material perpendicular to the plane of the surface.
 3.8x1015 Ohms⋅cm
Dielectric Constant
Dielectric Constant
Dielectric Constant (k), commonly known as relative permittivity, is a number relating the ability of a material to carry alternating current to the ability of vacuum to carry alternating current.

It determines the ability of an insulator to store electrical energy and is the ratio of electric permeability in vacuum against the electric permeability of a material.

The lower the dielectric constant (κ) and dissipation factor, the less energy is absorbed from an electric field, making it a much better insulator.

It is a dimensionless property that can be affected by various factors such as the
thickness uniformity of a material, insufficient contact between the sample and electrodes, water adsorption and contact resistance.
Dielectric Constant @ 1000 kHz 8.5
Thermal Properties
Thermal Conductivity
Thermal Conductivity
Thermal conductivity describes the ability of a material to conduct heat. It is required by power packages in order to dissipate heat and maintain stable electrical performance.

Thermal conductivity units are [W/(m K)] in the SI system and [Btu/(hr ft °F)] in the Imperial system.
 6.0 W/m.K
Thermal Impedance 0.25 °C·cm²/W
UL94 Rating
Flammability V-0

Additional Information

alt