ABchimie APS AC31 Acrylic Thinner

Harmonization Code : 3814001000 |  
Main features
  • Formulated for acrylic conformal coatings
  • Provides stable evaporation behavior
  • Enables viscosity control

Product Description

ABchimie APS AC31 is a specially formulated solvent blend designed for use with all acrylic‑based conformal coatings. It is particularly recommended for thinning acrylic coatings such as ACC11 to achieve optimal application characteristics. APS AC31 provides precise viscosity adjustment for both dip‑coating and spray‑coating processes, ensuring smooth film formation and consistent protective performance.

Product Key Features

  • Formulated specifically for acrylic conformal coatings
  • Optimized compatibility with ACC11 and similar acrylic coatings
  • Enables viscosity control for both dip and spray applications

Applications

  • Dilution of acrylic coatings for spray‑gun application
  • Viscosity adjustment for dip‑coating processes
Product Family
ABC-APSAC31  
5L Bulk

Catalog Product

Unlike other products we offer, the products listed on this page cannot currently be ordered directly from the website.
Shipping in 8 weeks
Packaging
TDS, SDS & Technical documents

Technical Specifications

General Properties
Mix Ratio
Mix Ratio
The amount of a constituent divided by the total amount of all other constituents in a mixture
 2:1 or 1:1

Additional Information

Instructions for Use

Spray Coating

When solvent based coatings are sprayed, the higher pressure at the nozzle forces the solvent within the coating to evaporate. To avoid cob-webbing , extra solvent must be added. APS AC31 should be used at levels of between 2:1 and 1:1 (Coating:Thinners) depending upon the application. To avoid microbubbles in the coating, stand 2 minutes before attempting to spray.

Dip Coating

APS AC31 may be used to maintain the viscosity of acrylic conformal coatings in open tanks used in dip coating processes. Over time the solvent within the coatings evaporates, increasing the viscosity of the coating, and giving a thicker coating. This solvent loss must be replaced to maintain the correct viscosity to give an economical coating thickness. APS AC31 is a flammable solvent blend and should be used in a well ventilated area and all sources of ignition must be avoided.