ABchimie NCE Fast-Drying Solvent

Harmonization Code : 3814001000 |

Main features

Leaves surfaces perfectly clean and dry
Fast-drying solvent for efficient cleaning
Harmless to most plastics, rubbers, elastomers, and coatings

Product Description

ABchimie NCE is a fast-drying solvent specially formulated for efficient cleaning of electrical and electronic equipment where rapid evaporation is required. It is ideal for removing grease, flux residues, dust, and other contaminants without leaving residues that attract dirt.

Unlike conventional solvents, ABchimie NCE evaporates quickly to leave surfaces perfectly clean and dry, ensuring no interference with subsequent assembly or operation. It is generally safe on most plastics, rubbers, elastomers, and surface coatings, making it suitable for a wide range of precision electronics and optical applications.

Product Key Features

Fast-drying solvent for efficient cleaning
Leaves surfaces perfectly clean and dry
Harmless to most plastics, rubbers, elastomers, and coatings
Ideal for electrical contacts, PCB components, optical and precision instruments, and cameras
Available in aerosol and bulk packaging formats

Applications

Electrical contacts and tape heads
PCBs, components, and computer electronics
Optical and precision instruments
Cameras and video equipment
Maintenance and cleaning of electronics where rapid evaporation is needed

Specifications
Additional Information

Technical Specifications

General Properties
Evaporation Rate	2
Specific Gravity Specific Gravity Specific gravity (SG) is the ratio of the density of a substance to the density of a reference substance; equivalently, it is the ratio of the mass of a substance to the mass of a reference substance for the same given volume. For liquids, the reference substance is almost always water (1), while for gases, it is air (1.18) at room temperature. Specific gravity is unitless.	0.79
Thermal Properties
Boiling Point Boiling Point The amount of degree’s needed to reach in order to make the substance boil.	36 °C
Flash Point Flash Point The flashpoint of a solvent is the lowest possible temperature at which it can vaporize to form an ignitable vapor. Flashpoint is often confused with “autoignition temperature”, which is the temperature at which a solvent ignites without an ignition source.	-48 °C

Additional Information

ABchimie NCE – Fast-Drying Solvent

Frequently Asked Questions About ABchimie NCE

Is ABchimie NCE safe to use on live electrical equipment?

No. NCE should not be sprayed on energized or live circuits. Always power down and disconnect equipment before cleaning, and keep away from sparks or ignition sources.

Does ABchimie NCE leave any residue after cleaning?

No. NCE evaporates rapidly and completely, leaving surfaces clean and dry with minimal residue <50ppm, preventing dust or dirt attraction.

Can ABchimie NCE be used on all types of materials?

Yes. NCE is generally safe for most metals, plastics, rubbers, elastomers, and coatings. For delicate or coated surfaces, it is recommended to test a small area before large-scale cleaning.

How should I apply ABchimie NCE for best results?

Apply NCE by spraying, immersing, or wiping onto the surface. Allow full evaporation before resuming operation. For optimal cleaning, use lint-free cloths and avoid contact with energized equipment or ignition sources.

Learn More About ABchimie NCE

ABchimie NCE is a fast-drying solvent specially formulated for efficient cleaning of electrical and electronic equipment where rapid evaporation is required. It is ideal for removing grease, flux residues, dust, and other contaminants without leaving residues that attract dirt.

Unlike conventional solvents, ABchimie NCE evaporates quickly to leave surfaces perfectly clean and dry, ensuring no interference with subsequent assembly or operation. It is generally safe on most plastics, rubbers, elastomers, and surface coatings, making it suitable for a wide range of precision electronics and optical applications.

Application Methods

ABchimie NCE can be applied via immersion, spraying, or wiping to remove grease, flux, dust, and residues quickly and efficiently.

Application Methods:

Spray Application: Spray directly onto contaminated surfaces or onto a lint-free cloth. Allow the solvent to evaporate completely.
Immersion: Immerse small components or parts in NCE to dissolve and remove residues, then allow to evaporate.
Manual Wiping: Apply with a brush or lint-free cloth to remove surface contaminants effectively.

Important Notes:

Do not use on energized or live electrical equipment.
Keep away from open flames and ignition sources, as NCE is highly flammable.
Ensure complete evaporation before resuming operation.

Application Compatibility

ABchimie NCE is generally safe for most materials encountered in electronics and precision equipment.

Compatible With:
✔ Metals, including stainless steel and aluminum
✔ Most plastics, rubbers, and elastomers
✔ Surface coatings commonly found in electronic assemblies

Not Recommended For:
✖ Live electrical circuits or energized equipment
✖ Surfaces highly sensitive to solvents (test small area first)

Additional Guidance:
Always verify material compatibility on delicate or coated surfaces. Use lint-free wipes for optimal results and to avoid contamination.

Safety and Handling Precautions ⚠️

Use only in well-ventilated areas.
Avoid contact with skin and eyes.
Do not inhale vapors or spray mist.
Keep away from sparks, hot surfaces, or open flames.
Store tightly closed in a cool, dry, ventilated location.

Always consult the Safety Data Sheet (SDS) for detailed handling and first aid information.

Storage Recommendations 📦

Store ABchimie NCE in its original, tightly sealed container away from heat, sunlight, and ignition sources. Avoid prolonged storage in high-temperature areas.