- Home
- Products
- Coatings, powders & Resins
- Thinners
- HumiSeal Thinner 901
HumiSeal Thinner 901
Harmonization Code : 3814001000 |
Main features
- Low toxicity
- BTX-free
- Compatible with multiple coatings
Product Description
HumiSeal Thinner 901 has been especially developed as a diluent for solvent based acrylic conformal coating products.
Product Key Features
- Xylene, Toluene and Ethyl Benzene free
- Very low aromatic hydrocarbon content providing toxicity hazards in use
- Good compatibility with various coating types
Applications
Technical Specifications
| General Properties | |
| Color Color The color | Clear |
| Specific Gravity Specific Gravity Specific gravity (SG) is the ratio of the density of a substance to the density of a reference substance; equivalently, it is the ratio of the mass of a substance to the mass of a reference substance for the same given volume. For liquids, the reference substance is almost always water (1), while for gases, it is air (1.18) at room temperature. Specific gravity is unitless. | 0.87 |
| Vapor Pressure | 0.0407886 kg/cm2 |
| Thermal Properties | |
| Boiling Point Boiling Point The amount of degree’s needed to reach in order to make the substance boil. | 120 °C |
| Flash Point Flash Point The flashpoint of a solvent is the lowest possible temperature at which it can vaporize to form an ignitable vapor. Flashpoint is often confused with “autoignition temperature”, which is the temperature at which a solvent ignites without an ignition source. | 21 °C |
Additional Information
Directions for Use
Add HumiSeal Thinner to a compatible coating until the desired viscosity is obtained.
Handling Precautions
HumiSeal Thinners are flammable and the following standard safety precautions should be observed:
- Use only in well ventilated areas.
- Protective gloves and goggles should be worn.
- In case of prolonged skin contact, wash withwater.
- In case of eye contact, flush with water