- Home
- Products
- Electronics Assembly Adhesives & Inks
- Printable Electronics Inks
- LOCTITE M4100 E&C
LOCTITE M4100 E&C
Harmonization Code : 32159090 | Printing ink, writing or drawing ink, and other inks, whether or not concentrated or solid, specifically for those classified as other within that category
Main features
- Conductive
- screen printable
- Electroless nickel plateable
Product Description
LOCTITE M 4100 MINICO E&C electroless nickel plateable conductive polymer is designed as a terminator where the M2000 RS MINICO E&C polymer resistor series has been applied.
LOCTITE M 4100 MINICO E&C is designed to be applied using standard screen printing methods.
Technical Specifications
| General Properties | |||||
| Density (g) | 2800000 g/cm3 | ||||
| Solids | 78 % | ||||
| |||||
| Physical Properties | |||||
| Viscosity Viscosity Viscosity is a measurement of a fluid’s resistance to flow. Viscosity is commonly measured in centiPoise (cP). One cP is defined as the viscosity of water and all other viscosities are derived from this base. MPa is another common unit with a 1:1 conversion to cP. A product like honey would have a much higher viscosity -around 10,000 cPs- compared to water. As a result, honey would flow much slower out of a tipped glass than water would. The viscosity of a material can be decreased with an increase in temperature in order to better suit an application | 45 mPa.s | ||||
Additional Information
Storage
Store product in the unopened container in a dry location. Storage information may be indicated on the product container labeling.
Store in a cool, well ventilated area.
Optimal Storage : 18 to 25 °C
Material removed from containers may be contaminated during use. Do not return product to the original container. Henkel Corporation cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated.
