PIT2A-WL | 2-mil Polyimide (Kapton) Tape with Acrylic Adhesive | White-Labeled
- 2 mil polyimide film
- Non-silicone, acrylic adhesive
LINQTAPE PIT2A-WL-Series is a Kapton Tape Alternative used for thermal printing and provides an excellent balance of electrical, mechanical, thermal, and chemical properties over a wide range of temperatures. It can be used in applications that require themal printing on parts that can see high temperatures such as steel or other alloys.
| Adhesive Layer
A layer that is applied to one surface or both to bind items together and resist their separation
| Release Liner
A paper or plastic-based film sheet used to prevent a sticky surface from prematurely adhering
| Single or Double-Sided Adhesive
Single or Double-Sided Adhesive
Describes whether a tape is single- or double-sided. If it is single-sided, it has adhesive only on one side of the backing film. If it is double-sided, then it has adhesive on both sides of the backing film.
|Thermal Ink Print Layer
| Adhesion Strength
Adhesion is the bond strength measurement of a coating to a substrate. When an adhesive is bonded to an item or surface, numerous physical, mechanical and chemical forces come into play, which may have an effect on each other.