BS-6000 Series | Silyl Modified Polymers (SMP)

Main features
  • Very good UV-resistance and ageing properties
  • Good adhesion on several substrates without the use of a primer
  • High Modulus

Product Description

BS-6000 Series is a Migh Modulus elastic sealant/ adhesive based on Silyl Modified Polymers(SMP), which cures independently of atmospheric moisture.

BS-6000 Series is suitable as an adhesive or sealant for structures in industrial applications requiring high-strength.

Product Family
BS-6000 Version 101 20l pail

Catalog Product

Unlike other products we offer, the products listed on this page cannot currently be ordered directly from the website.

Technical Specifications

General Properties
Mix Ratio
Mix Ratio
The amount of a constituent divided by the total amount of all other constituents in a mixture
Mechanical Properties
Elongation is the process of lengthening something.

It is a percentage that measures the initial, unstressed, length compared to the length of the material right before it breaks.

It is commonly referred to as Ultimate Elongation or Tensile Elongation at break.
241 %
Curing Conditions
Curing Schedule
Curing Schedule
Curing schedule is the time and temperature required for a mixed material to fully cure. While this applies to materials that cure with heat, there are also other materials that can be cured with UV.

Even though some materials can cure on ambient temperatures, others will require elevated temperature conditions to properly cure.

There are various curing schedules depending on the material type and application. For heat curing, the most common ones are Snap cure, Low temperature cure, Step cure and Staged cure.

Recommended cure type, schedule, time and temperature can always be found on the Technical data sheets.
Cure Temperature 5-35 °C

Additional Information