LINQCELL CF400-MP | 400um Carbon Fabric

Harmonization Code : 6815.11.00.00 |   Articles of stone or of other mineral substances, not elsewhere specified or included; Non-electrical articles of graphite or other carbon; Carbon fibres and articles of carbon fibres
Main features
  • 0.4mm - 400um - 16mil
  • Comes in roll form
  • 13 TP Resistance

Product Description

LINQCELL CF400-MP is a 0.4mm thick carbon cloth with a Microporous layer and PTFE. It is commonly used as a gas diffusion layer and electrode for fuel cells. Its through-plane resistivity is less than 13 mΩcm2.

LINQCELL CF400-MP is typically used in PEM fuel cells as well as PA and DM fuel cell applications as a gas diffusion layer. These thinner gas diffusion layers offer good electrochemical performance and can also lend themselves to AEMFC GDL Anodes. Thickness has more sensitivity to the AEMFC when used in the anode electrode rather than in the cathode electrode, indicating that water removal at the anode was more challenging than water supply at the cathode so the strategy of water management among electrodes should be differentiated.

Carbon cloth based GDLs have performance equal to that of conventional carbon papers. Carbon cloth is more practical than carbon paper because of its superior compressibility, elasticity, and flexibility performance, making it more appropriate for ongoing manufacturing and assembly processes. Carbon cloths with a Microporous layer can achieve the required performance and provide an alternative option to carbon paper as GDL.

 

Product Family
CF400-MP  
50 x 200 cm

Catalog Product

Unlike other products we offer, the products listed on this page cannot currently be ordered directly from the website.

Technical Specifications

General Properties
Basis Weight
Basis Weight
Basis weight refers to the weight measured in pounds off 500 sheets of paper in that paper’s basic sheet size.
200 g/m2
Total Thickness
Total Thickness
Total thickness is taking into account all the films, coatings, adhesives, release liners and special layers and is the maximum thickness of a film or tape.
410 μm
Mechanical Properties
Tensile Strength (Thin Film)
Tensile Strength (Thin Film)
Tensile strength determines the resistance of a material to break under tension and it measures how much elongating load (or tensile stress) it can handle before fracture.

To make it simple, it measures how much force we have to apply when pulling apart a material before it breaks.
10 N/cm
Electrical Properties
TP Resistance
TP Resistance
Opposition to the flow of electric current.
13 mΩcm2