Harmonization Code : 3506.91.90.99 |   Prepared glues and other prepared adhesives, not elsewhere specified or included; products suitable for use as glues or adhesives, put up for retail sale as glues or adhesives, not exceeding a net weight of 1 kg ; Adhesives based on polymers of headings 3901 to 3913 or on rubber; Other ; Other
Main features
  • Nickel filled
  • For mismatched CTE
  • Basic conductivity

Product Description

LOCTITE ABLESTIK CE 3520-3 is a nickel-filled epoxy adhesive that combines a high elasticity with good adhesion on a variety of surfaces, making it suitable for applications with mismatched CTE.

LOCTITE ABLESTIK CE 3520-3 is a low-stress, flexible epoxy that is typically used for component attach and heat sink bonding. The nickel filler lends to the product some basic electrical conductivity. This material can operate in temperatures between -45 to 125°C

Cure Schedule

  • 60 minutes @ 120°C or
  • 30 minutes @ 150°C


Product Family
6oz Syringe

Catalog Product

Unlike other products we offer, the products listed on this page cannot currently be ordered directly from the website.

Technical Specifications

Physical Properties
Viscosity is a measurement of a fluid’s resistance to flow.

Viscosity is commonly measured in centiPoise (cP). One cP is defined as
the viscosity of water and all other viscosities are derived from this base. MPa is another common unit with a 1:1 conversion to cP.

A product like honey would have a much higher viscosity -around 10,000 cPs-
compared to water. As a result, honey would flow much slower out of a tipped glass than
water would.

The viscosity of a material can be decreased with an increase in temperature in
order to better suit an application
73,000 mPa.s
Electrical Properties
Volume Resistivity
Volume Resistivity
Volume resistivity, also called volume resistance, bulk resistance or bulk resistivity is a thickness dependent measurement of the resistivity of a material perpendicular to the plane of the surface.
2.0x10-1 Ohms⋅cm