Product Description
The one powder solution for low and medium voltage busbar and switch gear applications
DK15-0606 Tan is an epoxy-based coating powder developed for low and medium voltage (600V - 38,000V) bus bars. Used for over 20 years by major power distribution companies for low and medium-voltage bus bar applications, DK15-0606 provides a smooth surface appearance with high edge coverage properties and DK15-0606 is UL recognized for UL94-VO and an RTI of 130ºC operating temperatures. Particle size distribution of DK15-0606 is tailored for application via a fluid bed process.
DK15-0606 Tan is an epoxy based, "One Powder Solution" coating powder developed for low and medium voltage (600V - 38,000V) bus bars. Used for over 20 years by major power distribution companies for low and medium-voltage bus bar applications, DK15-0606 provides a smooth surface appearance with high edge coverage. The fusion bonded coating is smooth, tough, and moisture resistant for applications up to 38 KV. DK15-0606 is UL recognized for UL94-V0 rating and meets the UL746B Relative Thermal Index (RTI) of 130°C and is currently on-test for an RTI at or above 150°C. Rapid and thick build reduces production cycle times. Particle size is optimized for the fluidized bed coating process.
Advantages of DK15-0606 for Busbar Coating
- One powder for low and medium voltage busbars
- Used for more than 15 years by major power distribution companies
- Suitable for copper and aluminum bar
- Smooth, uniform coating build in excess of 200 mils (5 mm)
- Rapid build rates to reduce cycle times
- Productivity support including:
- Fine grind powder to replenish size distribution
- Fluidizing agent to promote uniform build
- Ongoing testing to optimize quality & productivity
Typical applications and uses of {product_name} include:
- Low Voltage (600V) Copper, Aluminum and Brass Busbars
- Medium Voltage (up to 38kV) Copper, Aluminum and Brass Busbars
- Switchgear Equipment for Power Distribution