MG33-0690 Black Epoxy Mold Compound

Harmonization Code : 3907.30.00.90 |   Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms : Epoxide resins : Other
Main features
  • Black epoxy mold compound
  • Transfer molding
  • Class B (130°C)

Product Description

Fast cure, solvent resistant compound with superior copper adhesion for engine gear tooth and other automotive sensors.

MG33-0690 is a fast cure, solvent resistant epoxy mold compound with excellent adhesion to copper substrates. MG33-0690 is a highly cross-linked compound used on devices that require resistance from typical automotive fluids including ethanol, ethylene glycol, transmissions oils, automatic transmission fluids, and mineral spirits. MH33-0690 is used to make automotive engine actuators and sensors, including engine gear tooth sensors, position sensors, speed sensors, torque sensors, parking sensors, tire pressure senors, and other automotive engine sensors.

MG33-0690 (formerly developmental number NB2904-7A) is the first in our new series of high-performance, Halogen-Free epoxy molding compounds. Designed specifically for High Power Applications including Resistors, Diodes, Capacitors and Varistors, the MG33-0690 was formulated intentionally without any flame retardants to meet the recent Halogen-Free (ie. “Green”) requirements. Despite the absence of flame retardants, it should also meet the UL94V0 rating at 1/4 inch (6.4mm).

Compared to other standard epoxy mold compounds, MG33-0690 also has noticeable better release and has been used successfully for both screw-injection molding as well as transfer molding. It is available as both bulk material as well as preformed into pellets

Product Family
MG0690  
Pellet
40.6MM x 40G mm

No longer available

This product is no longer available or will become obsolete soon. Please contact us so we can recommend an alternative product.

Technical Specifications

General Properties
Process Method Transfer Molding
Thermal Properties
UL 94 Rating
UL 94 Rating
Flammability rating classification.
It determines how fast a material burns or extinguishes once it is ignited.

HB: slow burning on a horizontal specimen; burning rate less than 76 mm/min for thickness less than 3 mm or burning stops before 100 mm
V-2: burning stops within 30 seconds on a vertical specimen; drips of flaming particles are allowed.
V-1: burning stops within 30 seconds on a vertical specimen; drips of particles allowed as long as they are not inflamed.
V-0: burning stops within 10 seconds on a vertical specimen; drips of particles allowed as long as they are not inflamed.
5VB: burning stops within 60 seconds on a vertical specimen; no drips allowed; plaque specimens may develop a hole.
5VA: burning stops within 60 seconds on a vertical specimen; no drips allowed; plaque specimens may not develop a hole
Class B (130°C)
Other Properties
RoHS Compliant
RoHS Compliant
RoHS is a product level compliance based on a European Union Directive which restricts the Use of certain Hazardous Substances in Electrical and Electronic Equipment (RoHS).

Products compliant with this directive do not exceed the allowable amounts of the following restricted materials: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) and polybrominated diphenyl ethers (PBDE), with some limited exemptions
Yes

Additional Information

Pricing & Availability

Pricing for {product_seo_name}

Pricing and Volume Price Breaks for MG33-0690 Black Epoxy Mold Compound are available by contacting us. You cannot order this product directly online.

CAPLINQ lists all its prices without taxes, shipping payment charges or discounts. CAPLINQ has warehouses and ships from both Canada and the Netherlands, and if your shipping address is one of these two countries, applicable taxes will be applied.

If your shipping address is to the United States, we request your company’s Employer Identification Number (EIN) or Tax Identification Number (TIN). This is a unique 9-digit number assigned by the IRS and is required for all cross-border shipments. Failure to provide this number could result in delays to your order.

If your shipping address is within the EU, but outside the Netherlands, then we are required to request your company's Value Added Tax (VAT, BTW, MwSt) number to be able to ship the goods tax-free. For all other countries, no taxes are levied on your orders.

DON'T LIKE THESE PRICES? Tell us what you will pay for what order quantity, and our customer service team will get back tou you within 24 hours with a reply..


Minimum Order Quantity for MG33-0690 Black Epoxy Mold Compound

The minimum order quantity for this package size is (s).


Shipping Charges for MG33-0690 Black Epoxy Mold Compound

All prices shown are ex-works CAPLINQ, but during the checkout process, you will be given several shipping options including Canada Post, TNT, UPS or the choice of using your own freight forwarder. Depending on your shipping address, the shipping charges will be calculated as follows:

  • Europe, Middle East, Asia and Africa: Shipping from CAPLINQ Europe BV (Amsterdam, the Netherlands)
  • Canada, USA, Mexico and South America: Shipping from CAPLINQ Corporation (Ottawa, Canada)

Payment option for MG33-0690 Black Epoxy Mold Compound

During the checkout process, you will be presented with several payment options including:

  • Credit Card (We accept VISA and Mastercard)
  • Bank Transfer (You will be given the payment instructions at the time of order placement)
  • PayPal (Where you can also pay with American Express Cards)
  • Purchase Order (You must be preapproved first. See our Online Credit Application)

Availability for MG33-0690 Black Epoxy Mold Compound

To the right of the product is a small icon that lets you know the availability and leadtime of the product. This leadtime is the time to ship the product and delivery times vary based on the method of delivery you select at the time you place your order.

Contact us if anything is unclear or you need more assistance.

Technical Specifications

Short Description of MG33-0690 Black Epoxy Mold Compound

Typical applications and uses of MG33-0690 Black Epoxy Mold Compound include:

  • Electrical Insulation
  • Motor Irons
  • Bus Bars

Technical Datasheets for MG33-0690 Black Epoxy Mold Compound

TDS (English) Kapton_Technical_Data_Sheet Click to access MG33-0690 Black Epoxy Mold Compound Technical Data Sheet
*Note that only registered users may access technical datasheets

Competitive Crossovers

Compare price and quality of MG33-0690 Black Epoxy Mold Compound to these other brands
Popular Brand1
Names
Product
Description
CAPLINQ
Part#
  • Pelnox PCE-282

Fast cure, solvent resistant compound with superior copper adhesion for engine gear tooth and other automotive sensors.

MG33-0690 is a fast cure, solvent resistant epoxy mold compound with excellent adhesion to copper substrates. MG33-0690 is a highly cross-linked compound used on devices that require resistance from typical automotive fluids including ethanol, ethylene glycol, transmissions oils, automatic transmission fluids, and mineral spirits. MH33-0690 is used to make automotive engine actuators and sensors, including engine gear tooth sensors, position sensors, speed sensors, torque sensors, parking sensors, tire pressure senors, and other automotive engine sensors.

MG33-0690 (formerly developmental number NB2904-7A) is the first in our new series of high-performance, Halogen-Free epoxy molding compounds. Designed specifically for High Power Applications including Resistors, Diodes, Capacitors and Varistors, the MG33-0690 was formulated intentionally without any flame retardants to meet the recent Halogen-Free (ie. “Green”) requirements. Despite the absence of flame retardants, it should also meet the UL94V0 rating at 1/4 inch (6.4mm).

Compared to other standard epoxy mold compounds, MG33-0690 also has noticeable better release and has been used successfully for both screw-injection molding as well as transfer molding. It is available as both bulk material as well as preformed into pellets


  • MG33-0690 Black Epoxy Mold Compound
 
 

Videos & Other Media

Videos & Other Related Media

Sorry, there are no related videos at this time.

Additional Information

Additional Information about MG33-0690 Black Epoxy Mold Compound
  • Harmonization Code
    • Customs Harmonization Code (HTS#) for MG33-0690 Black Epoxy Mold Compound
      3907.30.00.90 |  
  • Additional Information

Product Reviews

Product Reviews for MG33-0690 Black Epoxy Mold Compound

Packaging Details

Packaging Details for MG33-0690 Black Epoxy Mold Compound

The following information is specifically related to each unit of measure of MG33-0690 Black Epoxy Mold Compound. If you which to compare this to other product sizes, click on the respective product from the list above and check here for values specific to that product. These values are taken from our internal database and are used in the calculation of the gross weight and packaging dimensions of the goods during shipping. You can use these values to to approximate delivery charges using your own carrier.

Each unit of MG33-0690 Black Epoxy Mold Compound has the following:

  • Unit of Measurement:
  • Dimensions (length x width x height): 0 x 0 x 0
  • Weight:

View Blogs & Forum

Read and discuss MG33-0690 Black Epoxy Mold Compound on CAPLINQ's Blog and Forum

CAPLINQ is different. Unlike other business to business enterprises, we encourage our customers to discuss, critique, and otherwise comment on the products we offer. Get more technical information, read detailed posts, and see what customers have to say about about MG33-0690 Black Epoxy Mold Compound on our Corporate Blog and Forum.

  • Read more about MG33-0690 Black Epoxy Mold Compound on our Blog.
  • Join the discussion about MG33-0690 Black Epoxy Mold Compound on our Forum.